Leak Sealer

Leak Sealer 1 Litre 

Leak sealer is designed to seal minor leaks in pools and spas.

1.Turn pool pump off. Set filter on by-pass or re-circulate setting.

2.Leak sealer should be added to the pool at the rate of 1 litre per 60,000 litres of pool water.

3.For leaks in pool walls or floor - Add leak sealer directly into the pool water. Where it is possible to locate the area of the leak then add the product in this area. Otherwise evenly distribute around the pool.

4.For leaks in pipework - Add the correct dose of leak sealer directly into the skimmer.

5.Wait 30 minutes and then turn pump on. Leave pump running for a minimum of 8 hours. Mark water level and Check after 24 hours. A second application may be required in larger pools.

6.Return the filter setting to normal once the leak sealer has taken effect and resume normal filtration.

Swimming may be resumed 24 hours after addition of product